; The CMD file. ; ; Two parts: 1. Command definition and 2. State entry ; (state entry is after the commands def section) ; ; 1. Command definition ; --------------------- ; Note: The commands are CASE-SENSITIVE, and so are the command names. ; The eight directions are: ; B, DB, D, DF, F, UF, U, UB (all CAPS) ; corresponding to back, down-back, down, downforward, etc. ; The six buttons are: ; a, b, c, x, y, z (all lower case) ; In default key config, abc are are the bottom, and xyz are on the ; top row. For 2 button characters, we recommend you use a and b. ; For 6 button characters, use abc for kicks and xyz for punches. ; ; Each [Command] section defines a command that you can use for ; state entry, as well as in the CNS file. ; The command section should look like: ; ; [Command] ; name = some_name ; command = the_command ; time = time (optional) ; buffer.time = time (optional) ; ; - some_name ; A name to give that command. You'll use this name to refer to ; that command in the state entry, as well as the CNS. It is case- ; sensitive (QCB_a is NOT the same as Qcb_a or QCB_A). ; ; - command ; list of buttons or directions, separated by commas. Each of these ; buttons or directions is referred to as a "symbol". ; Directions and buttons can be preceded by special characters: ; slash (/) - means the key must be held down ; egs. command = /D ;hold the down direction ; command = /DB, a ;hold down-back while you press a ; tilde (~) - to detect key releases ; egs. command = ~a ;release the a button ; command = ~D, F, a ;release down, press fwd, then a ; If you want to detect "charge moves", you can specify ; the time the key must be held down for (in game-ticks) ; egs. command = ~30a ;hold a for at least 30 ticks, then release ; dollar ($) - Direction-only: detect as 4-way ; egs. command = $D ;will detect if D, DB or DF is held ; command = $B ;will detect if B, DB or UB is held ; plus (+) - Buttons only: simultaneous press ; egs. command = a+b ;press a and b at the same time ; command = x+y+z ;press x, y and z at the same time ; greater-than (>) - means there must be no other keys pressed or released ; between the previous and the current symbol. ; egs. command = a, >~a ;press a and release it without having hit ; ;or released any other keys in between ; You can combine the symbols: ; eg. command = ~30$D, a+b ;hold D, DB or DF for 30 ticks, release, ; ;then press a and b together ; ; Note: Successive direction symbols are always expanded in a manner similar ; to this example: ; command = F, F ; is expanded when MUGEN reads it, to become equivalent to: ; command = F, >~F, >F ; ; It is recommended that for most "motion" commads, eg. quarter-circle-fwd, ; you start off with a "release direction". This makes the command easier ; to do. ; ; - time (optional) ; Time allowed to do the command, given in game-ticks. The default ; value for this is set in the [Defaults] section below. A typical ; value is 15. ; ; - buffer.time (optional) ; Time that the command will be buffered for. If the command is done ; successfully, then it will be valid for this time. The simplest ; case is to set this to 1. That means that the command is valid ; only in the same tick it is performed. With a higher value, such ; as 3 or 4, you can get a "looser" feel to the command. The result ; is that combos can become easier to do because you can perform ; the command early. Attacks just as you regain control (eg. from ; getting up) also become easier to do. The side effect of this is ; that the command is continuously asserted, so it will seem as if ; you had performed the move rapidly in succession during the valid ; time. To understand this, try setting buffer.time to 30 and hit ; a fast attack, such as KFM's light punch. ; The default value for this is set in the [Defaults] section below. ; This parameter does not affect hold-only commands (eg. /F). It ; will be assumed to be 1 for those commands. ; ; If you have two or more commands with the same name, all of them will ; work. You can use it to allow multiple motions for the same move. ; ; Some common commands examples are given below. ; ; [Command] ;Quarter circle forward + x ; name = "QCF_x" ; command = ~D, DF, F, x ; ; [Command] ;Half circle back + a ; name = "HCB_a" ; command = ~F, DF, D, DB, B, a ; ; [Command] ;Two quarter circles forward + y ; name = "2QCF_y" ; command = ~D, DF, F, D, DF, F, y ; ; [Command] ;Tap b rapidly ; name = "5b" ; command = b, b, b, b, b ; time = 30 ; ; [Command] ;Charge back, then forward + z ; name = "charge_B_F_z" ; command = ~60$B, F, z ; time = 10 ; ; [Command] ;Charge down, then up + c ; name = "charge_D_U_c" ; command = ~60$D, U, c ; time = 10 ;-| Button Remapping |----------------------------------------------------- ; This section lets you remap the player's buttons (to easily change the ; button configuration). The format is: ; old_button = new_button ; If new_button is left blank, the button cannot be pressed. [Remap] x = x y = y z = z a = a b = b c = c s = s ;-| Default Values |------------------------------------------------------- [Defaults] ; Default value for the "time" parameter of a Command. Minimum 1. command.time = 15 ; Default value for the "buffer.time" parameter of a Command. Minimum 1, ; maximum 30. command.buffer.time = 5 ;-| Super Motions |-------------------------------------------------------- ;The following two have the same name, but different motion. ;Either one will be detected by a "command = TripleKFPalm" trigger. ;Time is set to 20 (instead of default of 15) to make the move ;easier to do. ; [Command] name = "TripleKFPalm" command = ~D, DF, F, x+y [Command] name = "SmashKFUpper" command = ~D, D, x+y [Command] name="SoumerCombo" command= ~D,DB,B, a+b [Command] name="FinalSlam" command= ~D,DB,B,x+y ;-| Special Motions |------------------------------------------------------ [Command] name = "QuickguardL" command = $D,c [Command] name = "QuickguardL" command = c,$D [Command] name = "Throw" command = /z,x time = 4 [Command] name = "upper_x" command = ~F, D, DF, x [Command] name = "upper_y" command = ~F, D, DF, y [Command] name = "QCF_x" command = ~D, DF, F, x [Command] name = "QCF_y" command = ~D, DF, F, y [Command] name = "QCB_x" command = ~D, DB, B, x [Command] name = "QCB_y" command = ~D, DB, B, y [Command] name = "QCF_a" command = ~D, DF, F, a [Command] name = "QCF_b" command = ~D, DF, F, b [Command] name = "QCB_a" command = ~D, DB, B, a [Command] name = "QCB_b" command = ~D, DB, B, b [Command] name = "DD_x" command = ~D,D,x [Command] name = "DD_y" command = ~D,D,y [Command] name = "FF_a" command = ~F, F, a [Command] name = "FF_b" command = ~F, F, b [Command] name="UpSlashL" command=~B,F,x [Command] name="UpSlashH" command=~B,F,y ;-| Double Tap |----------------------------------------------------------- [Command] name = "FF" ;Required (do not remove) command = F, F time = 10 [Command] name = "BB" ;Required (do not remove) command = B, B time = 10 ;-| 2/3 Button Combination |----------------------------------------------- [Command] name = "recovery";Required (do not remove) command = x+y time = 1 ;-| Dir + Button |--------------------------------------------------------- [Command] name = "down_a" command = /$D,a time = 1 [Command] name = "down_b" command = /$D,b time = 1 ;-| Single Button |--------------------------------------------------------- [Command] name = "a" command = a time = 1 [Command] name = "b" command = b time = 1 [Command] name = "c" ;QUICKGUARD BUTTON command = c time = 1 [Command] name = "x" command = x time = 1 [Command] name = "y" command = y time = 1 [Command] name = "z" command = z time = 1 [Command] name = "start" command = s time = 1 ;-| Hold Dir |-------------------------------------------------------------- [Command] name = "holdfwd";Required (do not remove) command = /$F time = 1 [Command] name = "holdback";Required (do not remove) command = /$B time = 1 [Command] name = "holdup" ;Required (do not remove) command = /$U time = 1 [Command] name = "holddown";Required (do not remove) command = /$D time = 1 ;-| Press Dir |-------------------------------------------------------------- [Command] name = "fwd";Required (do not remove) command = $F time = 1 [Command] name = "back";Required (do not remove) command = $B time = 1 [Command] name = "up" ;Required (do not remove) command = $U time = 1 [Command] name = "down";Required (do not remove) command = $D time = 1 ;-| Hold Button|-------------------------------------------------------------- [Command] name = "holdx";Required (do not remove) command = /x time = 1 [Command] name = "holdy";Required (do not remove) command = /y time = 1 [Command] name = "holdz" ;GUARD BUTTON command = /z time = 1 [Command] name = "holda";Required (do not remove) command = /a time = 1 [Command] name = "holdb";Required (do not remove) command = /b time = 1 [Command] name = "holdc";Required (do not remove) command = /c time = 1 ;--------------------------------------------------------------------------- ; 2. State entry ; -------------- ; This is where you define what commands bring you to what states. ; ; Each state entry block looks like: ; [State -1, Label] ;Change Label to any name you want to use to ; ;identify the state with. ; type = ChangeState ;Don't change this ; value = new_state_number ; trigger1 = command = command_name ; . . . (any additional triggers) ; ; - new_state_number is the number of the state to change to ; - command_name is the name of the command (from the section above) ; - Useful triggers to know: ; - statetype ; S, C or A : current state-type of player (stand, crouch, air) ; - ctrl ; 0 or 1 : 1 if player has control. Unless "interrupting" another ; move, you'll want ctrl = 1 ; - stateno ; number of state player is in - useful for "move interrupts" ; - movecontact ; 0 or 1 : 1 if player's last attack touched the opponent ; useful for "move interrupts" ; ; Note: The order of state entry is important. ; State entry with a certain command must come before another state ; entry with a command that is the subset of the first. ; For example, command "fwd_a" must be listed before "a", and ; "fwd_ab" should come before both of the others. ; ; For reference on triggers, see CNS documentation. ; ; Just for your information (skip if you're not interested): ; This part is an extension of the CNS. "State -1" is a special state ; that is executed once every game-tick, regardless of what other state ; you are in. ; Don't remove the following line. It's required by the CMD standard. [Statedef -1] ;=========================================================================== ;--------------------------------------------------------------------------- ;Smash Kung Fu Upper (uses one super bar) [State -1, Smash Kung Fu Upper] type = ChangeState value = 3050 triggerall = command = "SmashKFUpper" triggerall = power >= 1000 triggerall = statetype != A trigger1 = ctrl trigger2 = hitdefattr = SC, NA, SA, HA trigger2 = stateno != 3000 trigger2 = stateno != 3050 trigger2 = stateno != 3060 trigger2 = Stateno != 3070 trigger2 = movecontact trigger3 = stateno = 1310 || stateno = 1330 ;From blocking ;--------------------------------------------------------------------------- ;Triple Kung Fu Palm (uses one super bar) [State -1, Triple Kung Fu Palm] type = ChangeState value = 3000 triggerall = command = "TripleKFPalm" triggerall = power >= 1000 trigger1 = statetype = S trigger1 = ctrl trigger2 = statetype != A trigger2 = hitdefattr = SC, NA, SA, HA trigger2 = stateno != 3000 trigger2 = stateno != 3050 trigger2 = stateno != 3060 trigger2 = Stateno != 3070 trigger2 = movecontact trigger3 = stateno = 1310 || stateno = 1330 ;From blocking ;--------------------------------------------------------------------------- ;Soumer Combo (Lv. 2) [State -1, Soumer Combo] type = ChangeState value = 3060 triggerall = command = "SoumerCombo" triggerall = power >= 2000 trigger1 = statetype = S trigger1 = ctrl trigger2 = statetype != A trigger2 = hitdefattr = SC, NA, SA, HA trigger2 = stateno != 3000 trigger2 = stateno != 3050 trigger2 = stateno != 3060 trigger2 = Stateno != 3070 trigger2 = movecontact trigger3 = stateno = 1310 || stateno = 1330 ;From blocking ;------------------------------------------------------------------------- ;Final Axe Slam (Lv. 3) [State -1, Soumer Combo] type = ChangeState value = 3070 triggerall = command = "FinalSlam" triggerall = power >= 3000 trigger1 = statetype = S trigger1 = ctrl trigger2 = statetype != A trigger2 = hitdefattr = SC, NA, SA, HA trigger2 = stateno != 3000 trigger2 = stateno != 3050 trigger2 = stateno != 3060 trigger2 = Stateno != 3070 trigger2 = movecontact trigger3 = stateno = 1310 || stateno = 1330 ;From blocking ;=========================================================================== ;This is not a move, but it sets up var(1) to be 1 if conditions are right ;for a combo into a special move (used below). ;Since a lot of special moves rely on the same conditions, this reduces ;redundant logic. [State -1, Combo condition Reset] type = VarSet trigger1 = 1 var(1) = 0 [State -1, Combo condition Check] type = VarSet trigger1 = statetype != A trigger1 = ctrl trigger2 = (stateno = [200,299]) || (stateno = [400,499]) trigger2 = stateno != 440 ;Except for sweep kick trigger2 = movecontact trigger3 = stateno = 1310 || stateno = 1330 ;From blocking var(1) = 1 ;--------------------------------------------------------------------------- ;Light Kung Fu Knee [State -1, Light Axe Soumersault] type = ChangeState value = 1050 triggerall = command = "QCB_a" triggerall = stateno != 240 trigger1 = var(1) ;Use combo condition (above) ;--------------------------------------------------------------------------- ;Strong Kung Fu Knee [State -1, Strong Axe Soumersault] type = ChangeState value = 1060 triggerall = stateno != 240 triggerall = command = "QCB_b" trigger1 = var(1) ;Use combo condition (above) ;----------------------------------------------------------------------- ;Light Kung Fu Knee [State -1, Light Axe Moonsault] type = ChangeState value = 1070 triggerall = stateno != 240 triggerall = command = "QCB_a" trigger1 = ctrl trigger1 = statetype = A ;--------------------------------------------------------------------------- ;Strong Kung Fu Knee [State -1, Strong Axe Moonsault] type = ChangeState value = 1071 triggerall = stateno != 240 triggerall = command = "QCB_b" trigger1 = ctrl trigger1 = statetype = A ;--------------------------------------------------------------------------- ;Light Kung Fu Palm [State -1, Light Axe Underhand] type = ChangeState value = 1000 triggerall = stateno != 240 triggerall = command = "QCF_x" trigger1 = var(1) ;Use combo condition (above) ;--------------------------------------------------------------------------- ;Strong Kung Fu Palm [State -1, Heavy Axe Underhand] type = ChangeState value = 1010 triggerall = stateno != 240 triggerall = command = "QCF_y" trigger1 = var(1) ;Use combo condition (above) ;--------------------------------------------------------------------------- ;Light Kung Fu Upper [State -1, Light Axe Rotator] type = ChangeState value = 1100 triggerall = stateno != 240 triggerall = command = "DD_x" trigger1 = var(1) ;Use combo condition (above) ;--------------------------------------------------------------------------- ;Strong Kung Fu Upper [State -1, Strong Axe Rotator] type = ChangeState value = 1110 triggerall = stateno != 240 triggerall = command = "DD_y" trigger1 = var(1) ;Use combo condition (above) ;--------------------------------------------------------------------------- ;Light Kung Fu Blow [State -1, Light Axe Overhead] type = ChangeState value = 1200 triggerall = stateno != 240 triggerall = command = "QCB_x" trigger1 = var(1) ;Use combo condition (above) ;--------------------------------------------------------------------------- ;Strong Kung Fu Blow [State -1, Strong Axe Overhead] type = ChangeState value = 1210 triggerall = stateno != 240 triggerall = command = "QCB_y" trigger1 = var(1) ;Use combo condition (above) ;--------------------------------------------------------------------------- ;Light Kung Fu Zankou [State -1, Light Axe Up-Slash] type = ChangeState value = 1400 triggerall = stateno != 240 triggerall = command = "UpSlashL" trigger1 = var(1) ;Use combo condition (above) ;--------------------------------------------------------------------------- ;Strong Kung Fu Zankou [State -1, Strong Axe Up-Slash] type = ChangeState value = 1410 triggerall = stateno != 240 triggerall = command = "UpSlashH" trigger1 = var(1) ;Use combo condition (above) ;=========================================================================== ;--------------------------------------------------------------------------- ;Run Fwd [State -1, Run Fwd] type = ChangeState value = 100 trigger1 = command = "FF" trigger1 = statetype = S trigger1 = stateno != 130 trigger1 = stateno != 131 trigger1 = stateno != 132 trigger1 = stateno != 120 trigger1 = ctrl ;--------------------------------------------------------------------------- ;Run Back [State -1, Run Back] type = ChangeState value = 105 trigger1 = command = "BB" trigger1 = statetype = S trigger1 = ctrl ;--------------------------------------------------------------------------- ;Kung Fu Throw [State -1, Kung Fu Throw] type = ChangeState value = 800 trigger1 = command = "Throw" triggerall = statetype != A triggerall = ctrl triggerall = stateno != 100 ;=========================================================================== ;--------------------------------------------------------------------------- ;Stand Light Punch [State -1, Stand Light Punch] type = ChangeState value = 200 triggerall = command = "x" triggerall = command != "holddown" trigger1 = statetype = S trigger1 = ctrl ;--------------------------------------------------------------------------- ;Stand Strong Punch [State -1, Stand Strong Punch] type = ChangeState value = 210 triggerall = command = "y" triggerall = command != "holddown" trigger1 = statetype = S trigger1 = ctrl trigger2 = (stateno = 200) && (Movecontact) trigger3 = (stateno = 230) && (MoveContact) ;--------------------------------------------------------------------------- ;Stand Light Kick [State -1, Stand Light Kick] type = ChangeState value = 230 triggerall = command = "a" triggerall = command != "holddown" trigger1 = statetype = S trigger1 = ctrl trigger2 = (stateno = 200) && (Movecontact) trigger3 = (stateno = 230) && (Movecontact) ;--------------------------------------------------------------------------- ;Standing Strong Kick [State -1, Standing Strong Kick] type = ChangeState value = 240 triggerall = command = "b" triggerall = command != "holddown" trigger1 = statetype = S trigger1 = ctrl trigger2 = (stateno = 200) && (Movecontact) trigger3 = (stateno = 230) && (Movecontact) ;--------------------------------------------------------------------------- ;Taunt [State -1, Taunt] type = ChangeState value = 195 triggerall = command = "start" trigger1 = statetype != A trigger1 = ctrl ;--------------------------------------------------------------------------- ;Crouching Light Punch [State -1, Crouching Light Punch] type = ChangeState value = 400 triggerall = command = "x" triggerall = command = "holddown" trigger1 = statetype = C trigger1 = ctrl trigger2 = (stateno = 200) && (Movecontact) trigger3 = (stateno = 230) && (MoveContact) trigger4 = (stateno = 420) && (MoveContact) ;--------------------------------------------------------------------------- ;Crouching Strong Punch [State -1, Crouching Strong Punch] type = ChangeState value = 410 triggerall = command = "y" triggerall = command = "holddown" trigger1 = statetype = C trigger1 = ctrl trigger2 = (stateno = 400) || (stateno = 430) trigger2 = movecontact trigger3 = (stateno = 200) && (Movecontact) trigger4 = (stateno = 230) && (MoveContact) ;--------------------------------------------------------------------------- ;Crouching Light Kick [State -1, Crouching Light Kick] type = ChangeState value = 430 triggerall = command = "a" triggerall = command = "holddown" trigger1 = statetype = C trigger1 = ctrl trigger2 = stateno = 400 trigger2 = movecontact trigger3 = (stateno = 200) && (Movecontact) trigger4 = (stateno = 230) && (MoveContact) ;--------------------------------------------------------------------------- ;Crouching Strong Kick [State -1, Crouching Strong Kick] type = ChangeState value = 440 triggerall = command = "b" triggerall = command = "holddown" trigger1 = statetype = C trigger1 = ctrl trigger2 = (stateno = 400) || (stateno = 430) trigger2 = movecontact trigger3 = (stateno = 200) && (Movecontact) trigger4 = (stateno = 230) && (MoveContact) ;--------------------------------------------------------------------------- ;Jump Light Punch [State -1, Jump Light Punch] type = ChangeState value = 600 triggerall = command = "x" trigger1 = statetype = A trigger1 = ctrl trigger3 = stateno = 1350 ;Air blocking ;--------------------------------------------------------------------------- ;Jump Strong Punch [State -1, Jump Strong Punch] type = ChangeState value = 610 triggerall = command = "y" trigger1 = statetype = A trigger1 = ctrl trigger2 = stateno = 600 || stateno = 630 ;jump_x or jump_a trigger2 = movecontact trigger3 = stateno = 1350 ;Air blocking ;--------------------------------------------------------------------------- ;Jump Light Kick [State -1, Jump Light Kick] type = ChangeState value = 630 triggerall = command = "a" trigger1 = statetype = A trigger1 = ctrl trigger2 = stateno = 1350 ;Air blocking trigger3 = stateno = 600 && movecontact trigger4 = stateno = 630 && movecontact ;--------------------------------------------------------------------------- ;Jump Strong Kick [State -1, Jump Strong Kick] type = ChangeState value = 640 triggerall = command = "b" trigger1 = statetype = A trigger1 = ctrl trigger2 = stateno = 600 || stateno = 630 ;jump_x or jump_a trigger2 = movecontact trigger3 = stateno = 1350 ;Air blocking ;--------------------------------------------------------------------------- ;GUARD STATES [State -1, Guard] type = ChangeState value = 120 triggerall = StateNo < 120 triggerall = command = "holdz" triggerall = statetype != A trigger1 = Var(50) >= 0 trigger1 = ctrl trigger2 = Var(50) < 0 trigger2 = EnemyNear, MoveType = A trigger2 = MoveType = I [State -1, Quick Guard S] type = ChangeState value = 160 triggerall = command = "c" triggerall = statetype = S trigger1 = Var(50) >= 0 trigger1 = ctrl [State -1, Quick Guard C] type = ChangeState value = 162 triggerall = command = "QuickguardL" triggerall = statetype = C trigger1 = Var(50) >= 0 trigger1 = ctrl [State -1, Quick Guard A] type = ChangeState value = 162 triggerall = command = "c" triggerall = statetype = C trigger1 = Var(50) >= 0 trigger1 = ctrl [State -1, Quick Guard A] type = ChangeState value = 164 triggerall = command = "c" triggerall = statetype = A trigger1 = Var(50) >= 0 trigger1 = ctrl [State -1, Air Dodge] type = ChangeState value = 166 triggerall = StateNo < 166 triggerall = command = "z" triggerall = statetype = A trigger1 = Var(50) >= 0 trigger1 = ctrl ;------------------------------------------------AI------------------------------------------------------------ ;Standing Normal Attacks--------------------------------------- [State -1, Light Punch] type = changestate value = 200 triggerall = AIlevel && numenemy triggerall = roundstate = 2 triggerall = !Win triggerall = (P2bodydist X = [0,90])&&(P2statetype !=L) trigger1 = (Statetype!=A)&&(ctrl)&&(Random<=500) [State -1, Heavy Punch] type = changestate value = 210 triggerall = AIlevel && numenemy triggerall = roundstate = 2 triggerall = !Win triggerall = (P2bodydist X = [0,90])&&(P2statetype !=L) trigger1 = (Statetype!=A)&&(ctrl)&&(Random<=50) trigger2=(Stateno=200||Stateno=230)&&(movecontact)&&(Random<=700) [State -1, Light Kick] type = changestate value = 230 triggerall = AIlevel && numenemy triggerall = roundstate = 2 triggerall = !Win triggerall = (P2bodydist X = [0,89])&&(P2statetype !=L) trigger1 = (Statetype!=A)&&(ctrl)&&(Random<=500) trigger2=(Stateno=200)&&(movecontact)&&(Random<=900) [State -1, Heavy Kick] type = changestate value = 240 triggerall = AIlevel && numenemy triggerall = roundstate = 2 triggerall = !Win triggerall = (P2bodydist X = [0,70])&&(P2statetype !=L) trigger1 = (Statetype!=A)&&(ctrl)&&(Random<=50) trigger2=(Stateno=200||Stateno=230)&&(movecontact)&&(Random<=700) ;Crouching Normal Attacks--------------------------------------- [State -1, Light Punch] type = changestate value = 400 triggerall = AIlevel && numenemy triggerall = roundstate = 2 triggerall = !Win triggerall = (P2bodydist X = [0,96])&&(P2statetype !=L)&&(P2Statetype!=A) trigger1 = (Statetype=C)&&(ctrl)&&(Random<=500) trigger2=(Stateno=200)&&(movecontact)&&(Random<=900) [State -1, Heavy Punch] type = changestate value = 410 triggerall = AIlevel && numenemy triggerall = roundstate = 2 triggerall = !Win triggerall = (P2bodydist X = [0,99])&&(P2statetype !=L)&&(P2Statetype!=A) trigger1 = (Statetype=C)&&(ctrl)&&(Random<=50) trigger2=(Stateno=400)&&(movecontact)&&(Random<=900) [State -1, Light Kick] type = changestate value = 430 triggerall = AIlevel && numenemy triggerall = roundstate = 2 triggerall = !Win triggerall = (P2bodydist X = [0,88])&&(P2statetype !=L)&&(P2Statetype!=A) trigger1 = (Statetype=C)&&(ctrl)&&(Random<=500) trigger2=(Stateno=400)&&(movecontact)&&(Random<=900) [State -1, Heavy Kick] type = changestate value = 440 triggerall = AIlevel && numenemy triggerall = roundstate = 2 triggerall = !Win triggerall = (P2bodydist X = [0,93])&&(P2statetype !=L)&&(P2Statetype!=A) trigger1 = (Statetype=C)&&(ctrl)&&(Random<=50) trigger2=(Stateno=430)&&(movecontact)&&(Random<=900) trigger3=(Stateno=400)&&(movecontact)&&(Random<=900)